NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Static Route Does Not Work in 2.0.0.74
See Attached. Any suggestions?
as the last post states you are in the wrong area. under advanced click on setup tab, then lan. at the bottom you can reserve address for devices.
Your subnet mask is not consistent with the Destination IP address. It "probably" should be 255.255.255.255, but you'll need to first explain what you are trying to do before definitive advice can be given.
I am trying to set a device on my LAN to keep its same ip address. That device is located on 192.168.1.233. I have already tried 255.255.255.255 and got the same results as in attachement on the original post. I can acess the destination address with my browser.
Any help much appreciated.
For that you want to reserve an IP address. See page 72 of the user manual here:
http://www.downloads.netgear.com/files/GDC/RBK50/Orbi_UM_EN.pdf
Thanks. That fixed it.
as the last post states you are in the wrong area. under advanced click on setup tab, then lan. at the bottom you can reserve address for devices.