This happen very sudden like a week ago. Access was fine before.

What Orbi model do you have? 

What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?

You'll need to factory reset the RBR by pressing the Reset button for 15 seconds then release. Connect a wired PC to the back of the RBR and setup from scratch using a wired PC and web browser at HTTP and 192.168.1.1 or orbilogin.com and walk thru the setup wizard. Do not attempt to use the orbi app for this. I would disconnect the RBR from the ISP modem/ont temporarily until you get thru the setup wizard.

---

superx3man wrote:

This happen very sudden like a week ago. Access was fine before.

Current state:

- 192.168.1.1 not accessible

- orbilogin.com not accessible

- https://192.168.1.1 not accessible

- http://192.168.1.1:5000/ result in a 404 not found

- ping 102.168.1.1 response CORRECTLY

- internet seems to be fine but a bit unstable.

- power cycled a few times (waited 10 minutes before restarting)

 

Is there anyway that i could avoid a factory reset, i have like 40 static ip setup that i'd want to avoid setting up again.

---