NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Turn off LEDs on RBK23
How I can rurn off leds on RBK23 satellites?
Which LED's? All ring LED's will light briefly during setup or after satellite connectivity's status change for few seconds and will then turn off, so in stable condition all ring LED's will be off.
All leds. I have one satellite in my bedroom, and led on all night.
There are two LED's on Orbi, please see below:
- Ring LED is off in normal operation mode, so you should have it off during night unless there are disturbances in the network. Do you have the Ring LED on at any time? Which color?
- Power LED is on as long power is on. You can turn it off only by powering off the node! :)
- I told about ring led. If it's possible to turn it off?
- Light blue or amber.
As I mentioned, The Ring LED is normally off, so you should have it off during night unless there are disturbances in the network.
If it turns blue or magenta often then you have instability in your network. If you use wireless backhaul then you need to check your radio network and improve the coverage between the router and satellite so the LED on the satellite will then always be off.
What is the distance between your router and satellite?