NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Typical Speedtest Result Expectations for CBK40 Kit
Anyone have FIRSTHAND knowlege of the actual throughput for a CBR40 - RBS20 via wifi? CPU - 1GbT (wired) - RBS20 ~~~ BACKHAUL ~~~ CBR40 - 1Gb CABLE It's essentially using the RBS20 as a bridg...
Heres what I get with my wired PC connected to a ASUS GT-AX11000 in wireless bridge mode connected to my Orbi 850 series connected to a CM1200 modem:
This is about max speed I generally see with most any of my 1Gb LAN devices.
Considering the AX4200 solution: CBK752. If I read the specs right it says back haul is 2.4Gb, leaving 1.2Gb and 600Mb for other devices. Should be adequate to allow 1Gb wireless down traffic. But, have a doubt based on the CBK40 experience - will the modem really do that 6Gb/s they claim. The application would be replacing the CBK40, the RBS connects to a 10G engineering network and bridges to the CBR a room away. Wire wasn't really an option - but - it might be worth it at this point, $600 is steep for a few extra Mb/s I don't really need).
FURRYe38 wrote:I had to take a quick look as well. I hadn't noticed that Ookla reported sparklight back then. I to remember seeing cable one back then.
I see that SL has the CBK40 on there 1Gb plan. Interesting it's at the bottom of the list:
Well if SL is seeing some issues. I'd keep on them. Other than this, you'll need to contact NG support and let them know what your seeing. I have long since moved from the CBK40 to now CM1200 and Orbi AX. Mostly over 900Mpbs when testing.
Waving a had accross the valley.
Heres what I get with my wired PC connected to a ASUS GT-AX11000 in wireless bridge mode connected to my Orbi 850 series connected to a CM1200 modem:
This is about max speed I generally see with most any of my 1Gb LAN devices.