NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

pjga1973's avatar
pjga1973
Follower
May 16, 2019

wireless security system issue with RBR40

anybody knows if any special setup should be done in router for wireless security system?. Cameras works perfect using the app but when I connect NVR to network for record or watch cameras on my tv, all cameras works erratically and almost frozen. I have Funlux/Zmodo cameras and NVR. Help is highly appreciated

1 Reply

  • FURRYe38's avatar
    FURRYe38
    Guru - Experienced User
    May 16, 2019

    What Firmware is currently loaded?
    What is the Mfr and model# of the ISP modem the NG router is connected too?
    Is the Orbi system operating in Router or AP mode?

    Are the security cameras wireless or wired to the NVR or Orbi? 

    How is the NVR connected to the Orbi? 


    What is the distance between the router and satellite(s)? 30 feet is recommended in between them to begin with depending upon building materials when wirelessly connected.

     

    What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
    Any Wifi Neighbors near by? If so, how many?

    Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings

    Try disabling the following and see:
    Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Save settings and reboot the router and satellite(s).

     

    Contact the camera Mfr for additional help and information on using there product with home class MESH Routers.