NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Retired_Member's avatar
Retired_Member
Feb 07, 2019

Firmware update

Hello.   I am from Poland and I own the Nighthawk M1 AT & T branded router. Ruter has no sim lock and works in Poland. However, I have a problem. Router can not connect to the Arlo application. A...
Firmware
Retired_Member's avatar
Retired_Member
Feb 07, 2019

Type in the command tftp -i [router IP] put [firmware filename].[file format]. Do NOT press Enter yet.

  1. Example: tftp -i 192.168.1.1 put R9000-V1.0.4.2.img

I work on a mac and I do not know where to insert this command

microchip8's avatar
microchip8
Master
Feb 07, 2019

you need to open a console and make sure you have the correct firmware image for your device model

  • Retired_Member's avatar
    Retired_Member
    Feb 07, 2019

    I have a good firmware but with this link I can not cope with this procedure on a Mac. I have done the actions described in the link for Mac users one after the other, but from a certain moment the system returns to the Windows environment. That's why I asked where to put this command in os system? There is no such information in this link.

  • Retired_Member's avatar
    Retired_Member
    Feb 07, 2019

    what you mean? "Open the console"

    • Retired_Member's avatar
      Retired_Member
      Feb 07, 2019

      Ok, I know what you mean...open a Terminal