NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
MR1100-100NAS no B20, NO SCC Carrier aggregation
Hello, I am using the MR1100-100NAS device. Firmware: MR1100-100NAS_23113828_NTG9x50C_12.05.05.00_00_GenericNA_01.02 (newest).
The device does not support the B20 frequency, the aggregation is a...
Also adding second screenshot showing aggregation that just doesn't work.
What are the other bands/cells what you miss ?
- Thank You for your answers.
B1+B3+B7 should be aggregated and it's fully supported by BTS (checked with few other devices with the same SIM) - again, it's not problem with SIM, BTS or ISP.
None of aggregation is working, 2CA too.
NETGEAR'S Support, could You please tell me if aggregation on my device can be somehow blocked?
MR1100-100NAS should support also B20, it's officially confirmed by NETGEAR - I've checked and it's not so it seems to be an critical bug in modem's firmware.
Without aggregation the device is almost useless in normal conditions.From the screen capture you provided, current firmware does not support B20, it might be limited by the firmware, need to wait for Netgear's official explanation if that was done in purpose or can be added in later firmware.
William
it seems this unit does not support B20, from the first screen capture, you might need to check on specsheet from the vendor for 100NAS. As for aggregation, it would be depending on the carrier if they do support aggregation.
William
