NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
MR1100 with LAN
We presently have a wired LAN, with about 40 ports, that connect to an ATT DSL modem through two 24 port ethernet switches. We want to switch trom DSL to ATT wireless internet, and ATT sent us a MR1100 mobile hot spot router to connect to their system. The wireless coverage of the MR1100 in the house is not good, and we are considering adding an ORBI router and satellites to extend the coverage in our house, which is about 3,500 sqft. I need to maintain our LAN connection for several non-wireless computers, and be able to connect the MR1100 internet service to these devices. Can I use an ethernet connection from the MR1100 to an ORBI router to give internet service to the LAN devices? How do I jmake this connection?
Unless ATT does prohibit it (Note: Features and controls can be different on carrier devices than on the retail versions), the M1/MR1100 (as well as the M2/MR2100, M5/MR5200, ...) can operated as plain "modems" when setting to IP Passthrough mode, with the router behind set as DHCP for its WAN port - for example of an Orbi router.
Needless to say, these battery operated hotspot wireless are intended to provide wireless on a short range, in a camper, a hotel room, to the laptop from the same table, ... not to cover a hole house.
1 Reply
Unless ATT does prohibit it (Note: Features and controls can be different on carrier devices than on the retail versions), the M1/MR1100 (as well as the M2/MR2100, M5/MR5200, ...) can operated as plain "modems" when setting to IP Passthrough mode, with the router behind set as DHCP for its WAN port - for example of an Orbi router.
Needless to say, these battery operated hotspot wireless are intended to provide wireless on a short range, in a camper, a hotel room, to the laptop from the same table, ... not to cover a hole house.