NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Serendipite's avatar
Serendipite
Follower
Dec 06, 2021

Nighthawk M2 disabled

My nighthawk m2 says WIFI Network is disabled but when I try to enable the screen comes up with WIFI Name Disabled and WIFI Password disabled and just continues to try and detect service...I am totall...
IYGEAL's avatar
IYGEAL
Aspirant
Jan 03, 2022
In my case factory reset hasn't helped. Model is AUS version (M21001TAUS), FW is 24.10.17.10. I made a detailed post on the other thread with 95 replies.
JohnPeng's avatar
JohnPeng
NETGEAR Expert
Jan 03, 2022
IYGEAL wrote:
In my case factory reset hasn't helped. Model is AUS version (M21001TAUS), FW is 24.10.17.10. I made a detailed post on the other thread with 95 replies.

Can you log in to WebUI and enable ethernet offloading and do a FW upgrade check? There is a newer version available for your device.

 

FW: 10.19.03.00 and PRI 05.02

 

Thanks

 

John

  • IYGEAL's avatar
    IYGEAL
    Aspirant
    Jan 04, 2022
    JohnPeng wrote:
    IYGEAL wrote:
    In my case factory reset hasn't helped. Model is AUS version (M21001TAUS), FW is 24.10.17.10. I made a detailed post on the other thread with 95 replies.

    Can you log in to WebUI and enable ethernet offloading and do a FW upgrade check? There is a newer version available for your device.

     

    FW: 10.19.03.00 and PRI 05.02

     

    Thanks

     

    John

    I just connected via USB. Data offloading failed to apply. It stuck at "Applying changes"

     

    Also, Firmware Update is stuck at "Checking"