Epson L14150 connect to gs110emx not able to be found by mac

Question

HI,&nbsp;&nbsp;I have connected by newly bought Epson printer via ethernet port to the GS110EMX 1G port. It is detected as 100M. However, when I tried to setup the printer on my Macbook Pro, the printer was not found. When I connect the printer to a non-manage TPLINK switch 1G port, the printer was found immediately. All my Mac and printer are on the same network.&nbsp;&nbsp;May I know if there is a solution to enable GS110EMX so that my printer can be located ? I think there is something to do with broadcast.&nbsp;&nbsp;Any advise is much appreciated.&nbsp;

schumaku · Answer

With IGMP snooping enabled, do not tick the "Block Unknown Multicast Address"

kkah · Answer

schumaku&nbsp;Thank you for your reply. The switch IGMP is already enabled, and the&nbsp;"Block Unknown Multicast Address" is already disable in default. I have changed the "IGMP Snooping Static Router Port" to "any", (default is " "), the printer still not detected.&nbsp;&nbsp;

Forum Discussion

Epson L14150 connect to gs110emx not able to be found by mac

2 Replies

Related Content

pfSense VLAN with GS110EMX

Surprisingly slow throughput on GigE ports of GS110EMX

LACP link traffic levels on GS110EMX

Newbi help needed with VLAN performance MS108EUP and GS110EMX

GS110EMX - LAG on 10G ports

NETGEAR Academy

ProSupport for Business