NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
MS510TXPP Port No.3 data LED flashes when switch is started
It's a strange problem. After the ms510txpp is powered on and the fan runs at high speed for 1~2 seconds, it is found that the data light of No.3 network port lights up and goes out automatically after 1~2 seconds. No matter whether the network port is connected to the network cable or not. Does your switch have this phenomenon?
Firmware version: 6.7.0.51
If you don't have other issues with the switch and this specific port, I would not care about.
Nowadays, all these flashy LEDs are software and I/O port, including for link speed and activity indication, times are long gone when this was direct hardware controlled.
1 Reply
If you don't have other issues with the switch and this specific port, I would not care about.
Nowadays, all these flashy LEDs are software and I/O port, including for link speed and activity indication, times are long gone when this was direct hardware controlled.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
