NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Multiple port tagging
Hello, I have a complicated question so please bare with me for a moment. I have an ESXi 6.5 host that is running a virtual Sophos UTM 9.4 appliance. I also have a Netgear GS108Ev3 managed sw...
Since you have confirmed that the PC where the ESXi 6.5 host which runs a virtual Sophos UTM 9.4 appliance is a VLAN-aware device, have you checked if tagging is enabled on the physical LAN adapter of the PC? Kindly check this link as a guide on how to check it on your PC.
Also, kindly post images of your actual network setup that especially shows the PC where the ESXi 6.5 host which runs a virtual Sophos UTM 9.4 appliance is connected to the GS108Ev3.
Regards,
DaneA
NETGEAR Community Team
Hi vasileiosg,
Kindly answer the questions below:
a. Is the PC where the ESXi 6.5 host which runs a virtual Sophos UTM 9.4 appliance a VLAN-aware device?
b. Is the virtual Sophos UTM 9.4 appliance the DHCP server of VLAN 2 on the virtual VLAN 2 network as well as with the physical VLAN 2 network? Or, is there another DHCP server for the physical VLAN 2 network?
c. Since the physical devices on VLAN 2 communicate with each other, I believe that the PVID of VLAN 2 port members is set to 2. How about on the virtual VLAN 2, is the PVID also set to 2?
Regards,
DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
