NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Gary12's avatar
Gary12
Tutor
Sep 30, 2022
Solved

ProSafe GS108Ev3 VLAN failure

Below is my network setup.     Gateway: Ubiquiti UniFi Security Gateway 3P (USG-3P) Port 1: WAN (Internet) Port 2: LAN (Trunk port, Untagged VLAN1 and tagged VLAN13 and VLAN15).   Laundr...
  • Gary12's avatar
    Gary12
    Oct 28, 2022

    I found the problem. The configuration of the VLANs on the Unifi router was different than the Netgear switch.

     

    Subnet        

    SubnetVLAN UnifiVLAN Netgear
    192.168.13.0/24313
    192.168.14.0/24414
    192.168.15.0/24515

     

    After changing the VLAN on the Netgear switch, all tests pass!

     

    Thanks everyone

Retired_Member's avatar
Retired_Member
Oct 05, 2022

Gary12 

 

You defined all your switchports as trunk ports. An access port should be an untagged member of a single VLAN and have its PVID set to the VLAN ID.

 

Port 6: Untagged in VLAN 13, PVID=13

Port 7: Untagged in VLAN 15, PVID=15

Gary12's avatar
Gary12
Tutor
Oct 05, 2022
For this test, I wanted the netgear switch to have only trunk ports. It is not passing tagged traffic. My question is why?

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More