NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Steps to change the management VLAN for the GS108Tv3
Hi all, Would anybody be so kind as to provide the steps to change the management VLAN from 1 to 1001? The GS108Tv3 is connected to another switch that has tagged VLANs 1 and 1001 on port 1 and a w...
Welcome to the community! 🙂
By default, VLAN 1 is the Management VLAN and all ports are members of VLAN 1. Since VLAN 1001 is already created and all ports are still members of VLAN 1, you need at least one port to be a member of VLAN 1001 (for example: port 8). Then, you may now change the Management VLAN from VLAN 1 to VLAN 1001 via the web-GUI. In order to manage the switch, you need to connect a PC/laptop directly to port 8 to be able to manage the switch.
Regards,
DaneA
NETGEAR Community Team
That error pops up if there is no port on the switch with PVID the same as the VLAN ID you want to set. Once the Management VLAN ID is set, you should be able to access the web GUI of the switch from any port assigned to that VLAN even if it is on a different connected switch. Moreover that web GUI will be accessible from other VLANs if inter-VLAN routing has been setup. Make sure to change the IP address of the switch at the same time as the Management VLAN ID if you use a static IP address.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
