NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
UniFi USG to GS752TPv2
Hi, I'm just getting into VLANs, and am not getting it. I have read pretty much everywhere and watched several YouTube videos. I have a UniFi USG and I want to put my IP Cameras on its own subnet. I...
RickCJ7 wrote:I tagged Port 37 as seen in Screenshot3 and in PVID it shows VLAN 1,10 in Screenshot4 which should be right, according to what I read. Then for testing purposes, I plugged a computer in Port 37, did an ipconfig /release and then a /renew it is still showing an IP of 192.168.1.x. Shouldn't it be 192.168.10.x?
No - for two reasons:
1. The Ethernet port connecting to the USG must have an [U]ntagged membership for VLAN 1 (PVID 1 as you want untagged frames go into the VLAN 1) and a [T]agged membership for the VLAN 10. Can't see any such config on the screenshots.
2. For a computer or a camera supposed to connect to VLAN 10 the port must be configured [U]ntaged for VLAN 10 (PVID 10 as you want untagged frames from the computer going into VLAN 10). This port must not be a member of the VLAN 1 at all, so the default untagged membership on that port 37 must be removed.
RickCJ7 wrote:I tagged Port 37 as seen in Screenshot3 and in PVID it shows VLAN 1,10 in Screenshot4 which should be right, according to what I read. Then for testing purposes, I plugged a computer in Port 37, did an ipconfig /release and then a /renew it is still showing an IP of 192.168.1.x. Shouldn't it be 192.168.10.x?
No - for two reasons:
1. The Ethernet port connecting to the USG must have an [U]ntagged membership for VLAN 1 (PVID 1 as you want untagged frames go into the VLAN 1) and a [T]agged membership for the VLAN 10. Can't see any such config on the screenshots.
2. For a computer or a camera supposed to connect to VLAN 10 the port must be configured [U]ntaged for VLAN 10 (PVID 10 as you want untagged frames from the computer going into VLAN 10). This port must not be a member of the VLAN 1 at all, so the default untagged membership on that port 37 must be removed.
Ah-ah! That makes sense. It works now! Screenshot5 Thanks!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
