NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
WAC104 Access Point - how to change Netbios group
I have a WAC104 Wireless Access point. Firmware 1.0.4.21. Is there a way to change the Netbios group? It shows up as "Workgroup" by default and I'd like to change it to the name I use on my network. ...
Hi RAlfes62,
This option is not present on the WAC104.
You could request a feature, in the feature requests: https://community.netgear.com/t5/Idea-Exchange-For-Business/idb-p/idea-exchange-for-business
Or, speak to support, and have them raise a feature request for this.
The higher end APs, do have the option to have the Netbios name configured.
Mike
Five-by-one.
MikeD1234 wrote:
The higher end APs, do have the option to have the Netbios name configured.
No way my friend. Even if trying hard, I can't see any NetBIOS host announcements from any Netgear WAC5xx, WAX2xx, or WAX6xx. Nothing to reconfigure as not NetBIOS host announcements. Wild guess, you talk about the SSDP https://en.wikipedia.org/wiki/Simple_Service_Discovery_Protocol - which does not have any workgroup reference.
Needless to say, what the historic NetBIOS does show, is purely informative or organizational. It has no security relevance. Obsolete to think about a feature change IMHO.
Have located a WAC104 on an auction platform, ... when I make the highest bid (not willing to spend a lot of money on such old ***), I should have one at hand by tomorrow afternoon.
The WAXx00 series, support NetBIOS name:
So, in the WAX units, we can change this:
Furthermore, there is an option to enable/disable LLDP, that transmits some additional information, for switches to show. Which also uses the system name etc.
Mike
The claim this is supposed to be a NetBIOS name is at least misleading, but more likely simply wrong.
None of the WAC5xx or WAX6xx does neither broadcast an NDNS registration on changing the name nor are there the mandatory NDNS refresh cycles broadcasted. Examples attached.
Leaving alone that the modern Windows does no longer have the legacy Computer Browser Service enabled, even if the CIFS and SMB 1.0 "feature" is enabled...
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
