NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ProSafe SRX5308 How update firmware 3.0.8 to 4.3.4 by old CLI
Hello, community! I have a problem. I want update firmware 3.0.8 to 4.3.4, but i can't, because web-interface tell me about "error SSL vertion" (tried: FireFox, Chrome, IE 11). When I used consol...
Hi DaneA,
I tried your variant with TFTP. It didn't help. Maybe the 'root' pass , not 'admin', is needed, but I don't know it.
I've found a solution: used a PC with Win XP & IE 8 on board, connected via web-interface, updated the firmware and voila - it's alive!
Thank's for your help. :smileyhappy:
This discussion may be closed.
Regards,
Sjosy
Hi sjosy,
It is alright. :) I have just thought of this article below and let me share it to you on how to upload firmware using TFTP:
How to upload firmware to a NETGEAR router using TFTP
You may post your updates on this forum thread at anytime as well as you can open an online case with NETGEAR Support at anytime you want for further assistance.
Regards,
DaneA
NETGEAR Community Team
Hi DaneA,
I tried your variant with TFTP. It didn't help. Maybe the 'root' pass , not 'admin', is needed, but I don't know it.
I've found a solution: used a PC with Win XP & IE 8 on board, connected via web-interface, updated the firmware and voila - it's alive!
Thank's for your help. :smileyhappy:
This discussion may be closed.
Regards,
Sjosy
Hi sjosy,
I'm glad that you have resolved the problem. :)
Feel free to post your future concerns here in the community.
Regards,
DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
