NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Beware WAX630E Firmware 10.3.1.7 & 10.3.1.8 breaking networks
Heads up that both of the latest firmware updates for WAX630E APs (10.3.1.7 & 10.3.1.8) appear to break my pretty simple set up: Two WAX630E using POE++ Untagged VLAN unchecked Management VLAN c...
Got things working by moving management config back to the default VLAN (1) and split out 2.4ghz, 5ghz and 6ghz to separate SSIDs.
matt7277 wrote:
... I still had constant disconnects/crashes which I believe could be related to 2.4 GHZ and 5 GHZ being broadcasted on the same SSID...
operating large amount of Netgear wac5xx and wax6xx with SSID active on two or three radios
Nice. Are you running the 10.3.1.8 firmware on your WAX6xx devices? If so, have you noticed any issues with operating the management interface on an alternative VLAN ID? Do you have the untagged VLAN box checked?
matt7277 wrote:
If so, have you noticed any issues with operating the management interface on an alternative VLAN ID? Do you have the untagged VLAN box checked?
That makes a different topic I'm following for a longer time here. Unfortunately currently in the local university clinic a stroke center for almost four weeks now, so limited physical access to my test grounds.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
