NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
https://www.netgear.com/support/product/wax214/
Access point has two networks which have been running fine. This am the networks show up but iPads cannot connect to either one. Proper lights are showing on the top. Rebooted by disconnecting bot...
I have it sorted. It doesn’t like Safari.
What exactly are the the plans and intentions?
Technically, you can map any SSID, any band, to any VLAN and IP subnet - permitting these VLANs and subnet exist can reach the Internet or other internal VLANs and subnets, and a workable DHCP service is available for each of these VLANs of course.
Keep in mind these WAX2xx are intended for standalone deployments. For supporting seamless roaming, security different from WPA2-PSK for example WPA3-SAE or RADIUS based authentication or other portals, the Insight managed WPA6xx or WBE7xx re much better suited.
Thank you for your reply. I have a 5.0 network now installed on the AP. Now I want to add a second network with 2.4 as they have better range. How do I add a second network?
You can add upto 4 SSID's from wireless settings page, 2.4G, 5GHz, 2.4GHz and 5 GHz dual band.
Open AP page using DHCP IP address, Enable the SSID radio button, configure SSID name, passphrase and apply changes.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
