Same SSID networks failing with multiple APs on differnet channels.

Question

Hello All,&nbsp;I am running into an issue adding a WAC104 to my network.&nbsp; The WAC104 is connected via a managed switch that connects back to a Nighthawk router.&nbsp; Both the Nighthawk and the AP use the same SSID--say xyzNet.&nbsp; Both devices are set to non-overlapping channels on 2.4, 5 gHz.&nbsp; So from a basic stand point all of this should work. However anything that connects though the WAC104 WiFi will seemingly loose connectivity.&nbsp; I don not have this issue using other wired devices going through the switch nor if i connect to a LAN port in the WAC104.&nbsp;&nbsp;&nbsp;My DHCP is set up on the Nighthawk and does have a few reserved addresses.&nbsp; The WAC104 is set to an address in the same subnet 192.168.0.x&nbsp;&nbsp;&nbsp;For the life of me I can't figure out why devices drop off the WAC 104.&nbsp; Any suggestions?

plemans · Answer

If you connect the wac104 directly to the router, does it work?&nbsp;

holaworld · Answer

Excellent question.&nbsp; I had not done do due the the layout but I try it!&nbsp;

Forum Discussion

Same SSID networks failing with multiple APs on differnet channels.

2 Replies

Related Content

Missing 5Ghz Channels

5 GHz DFS channels - have you tried them?

Xr500 configure channels

network

Does 6GHz channel interfere with 5GHz channels on an RS700?

NETGEAR Academy

ProSupport for Business