NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
genie login/readyshare/newbie
newbie problem I have N300 CABLE NETGEAR ROUTER WNR2200, but I cant login via the genie software, however if I go via the ip route I can access the router page, also when I go to readyshare in the ...
Typically when you connect a modem/router combo unit and another router there will be issues unless they are connected properly.
I'm not familiar with the Sky, but you could either turn the Sky into a dedicated modem by placing the Sky into Bridge Mode and then use the WNR2200 as the primary router. You would have to log into the combo unit and see if you find the option or have your ISP make the change.
Or, use the Sky as the primary router and set up the WNR2200 as a secondary access point by following these instructions here. Skip step one.
I'm not familiar with the Sky, but you could either turn the Sky into a dedicated modem by placing the Sky into Bridge Mode and then use the WNR2200 as the primary router. You would have to log into the combo unit and see if you find the option or have your ISP make the change.
Or, use the Sky as the primary router and set up the WNR2200 as a secondary access point by following these instructions here. Skip step one.