NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
MR60 Anywhere Access on MR60 and iOS devices
Cannot connect on iPad and iPhone. Started about a month ago. Router is access point as other router is uses as a router. Getting attached error when connected to mail MR60 device.
Please try the Factory reset and setup from scratch using the NH app process I linked you to.
Be sure any MAC address randomizers are disabled during the setup with the NH app.
Both are disabled. Same issue. Error is “Wi-Fi not detected”
You sure your connected to the MR or MS?
What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
Be sure your using a good quality LAN cable between the modem and router. CAT6 is recommended.
What is the SSID name you gave on the MR during setup?
Wired router is a ubiquiti erLite. Anywhere connect worked perfectly until latest iPad/iOS update 16.5.1. All MR60/MS60 share the same ssid and this is the only network available/connected
Might try this:
Be sure the host routers wifi IS fully disabled.
Remember, this working correctly. I cannot change my SSID as all my iot devices will go off line and would take days to reset. I can access the MR60 setup page my connected desktop
Latest firmware on all: wired router, MR60, iOS devices
pisacksen wrote:
Latest firmware on all
Famous last words. Only a firmware number will convince us that the MK system has not missed something.
When I ran check for firmware on base and satellites from the desktop connected to the MR60, no firmware update available.
iOS/iPadOS: 16.6
ubiquiti router firmware: EdgeRouter Lite v2.0.9-hotfix.7
mr60/ms60 firmware: V1.1.7.134_2.0.65
