Nighthawk Install App: does not detect router

Hope8 wrote:
(Model is v3)
I upgraded my router from Linksys E1000 to the Nighthawk AC1750/R6700v3 using the Netgear Nighthawk App.

 

A better way to describe that might be replaced my router from Linksys E1000 to the Nighthawk AC1750/R6700v3.

You can't just unplug one router from your network and replace it with a different router. You have to rebuild the network.

As this is a router, there is probably a modem sitting in front of it. You need to get the router to forget its misspent past with the old modem. That means rebooting the network.

Be sure to restart your network in this sequence:

• Turn off and unplug modem.
• Turn off router and computers.
• Plug in and turn on modem. Wait 2 minutes for it to connect.
• Turn on the router and wait 2 minutes for it connect.
• Turn on computers and rest of network.

When you do restart the computers, remember that you have changed the network. Your PCs are joining a new network. So you may have to make some changes to the network settings. Windows, for example, may assume that you are now on a "public" network and block access to the Internet. So you may have to change that setting.

• Network and Internet settings
• Network Status
• Change Connection Properties
• Network Profile
• Private