NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Accidently updated the router before satellite on MK63
According to this web page: https://kb.netgear.com/000063806/MR60-MS60-Firmware-Version-V1-0-6-112-Hot-Fix I'm suppose to update MS (satellite) first then MR (router) second. As the title...
It looks so simple when it works, wow! I'll have to start using FF from here on.
After factory reset the RBS and log in as admin and password (default) and the update is completed.
Do i need to change password on RBS from default to match RBR prior syncing?
Good to hear. No, just re-sync the RBS to the RBR and it should acquire the data it needs.
@FURRYe38,
The RBS #1 is seems to be straightforward as your procedure. But when try to working on RBS #2, after factory reset I could not log in as 192.168.1.250 not sure why.
As for RBS #1 I was able to re-sync both wifi backhaul and wire backhaul. After log in to router, i can see RBS #1 is firmware V1.0.6.112.
For RBS #2 is still working/syncing on both wifi backhaul and wire backhaul and it shows V1.0.6.102 firmware.
I have tried updating RBS #2 thourgh routerlogin.net using V1.0.6.116 (8/18/2021), but still failed.
For now i have both RBS1 and 2 and RBR working as follow:
RBR = V1.0.6.112
RBS1 = V1.0.6.112
RBS2 = V1.0.6.102
Any ideas?
Thanks,
So with the RBS#2 ethernet connected to the RBR, it appears as connected and can you access it's web page at the assigned IP address using a web browser and send the FW file to it using MS Edge or Firefox?
Yes, with RBS#2 ethernet connected to the RBR i can access its web page. That's where i can see (RBR = V1.0.6.112, RBS1 = V1.0.6.112 and RBS2 = V1.0.6.102)
But when i try to send RS FW file either V1.0.6.112 or latest 116 still fail using google chrome.