NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Can't connect the ethernet port on an MR60 to a switch, it doesn't seem to recognize the switch.
I replaced my very old internet gateway with a new MR60 mesh system with 2 sattelites (MS60). I'm not sure what rhe exact model number is as the Model selector for the formum post does not recognize ...
I'm having a similar problem. MR60 with 1 satellite and SB6121 modem do not recognize that they are connected using known good patch cables. If I connect a device directly to the modem it is recognized and works properly.
This system is only 4 days old and was working fine until sometime while we were sleeping last night.
This system is only 4 days old and was working fine until sometime while we were sleeping last night.
Same issue here. New installation, router connected to a switch which also has two downline switches attached. Worked great for a few days then just stopped working. None of the computers on the LAN can get IP addresses, Wifi still working. Was there a new firmware update or something? so weird for it to stop working right in mid day with no actions on my part.
My issue was unrelated to firmware update, I had a bad switch downstream that was messing everything up. Just FYI, the one causing the problem was a TP Link 5 port switch I got from Home Depot.