NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
MK63: "Issues Connecting with [mesh network]" (but access to internet is fine throughout house)
MK63 AX1800 bought at Costco Jun 2020 Let me preface this with - access using t he Nighthawk Mesh system is working just fine throughout our house. I was thinking of adding a couple of new satell...
What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
If the ATT has a router built in, This would be a double NAT condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge or modem only mode. Then use the NG router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the NG router gets from the modem.
3. Or disable all wifi radios on the modem and connect the NG router to the modem, LAN to LAN configure AP mode on the NG router.
Need to make sure the mobile device that has the NH app on it, that it's connected to the MK wifi system, no the ATT wifi.
Review the user manual and installation guides for setting up the MK system.
https://www.netgear.com/support/product/mk62.aspx#docs
I don't think this is the issue,
I have AT&T fiberoptic modem. The mesh system is connected to that - but the mesh has a different name.
The system has worked fine for a year and a half. And, I have 4 teenagers, plus my wife and I - we are all still able to access the mesh throught our house at acceptable speeds.
the problem is that I cannot see access the network any longer using the Nighthawk App. which is v2.12.0.1770
So, as long as I don't want to change anything, it's okay. I used to go into the nighthawk app ocassionally to see the network - so I know it used to work. I have since changed phones - I don't know that i have ever tried to access the Nighthawk App on my current phone (The app was transfered from my previous phone).
I wanted to think of adding a couple new satelites to the system - and that is why I wanted to go into the app. So, I was surprised that I wasn't able to connect. The phone is actually connected to the mesh network right now. So why would the Nighthawk app tell me that it has "issues connecting with [network name]"?
Netgear has set up a community forum specifically for the Nighthawk App product. I would post about any NH app issues there. Most of the people who watch that forum are more likely to have experience with Nighthawk App and know how to work it better than those of us who follow this "general router" forum. Might be more likely to find someone who has a solution if the question is posted there:
https://community.netgear.com/t5/Nighthawk-App/bd-p/en-home-networking-apps
Good Luck.