MR60 Drops wifi but wired works

What is the size of your home? Sq Ft?
What is the distance between the router and 📡 satellite(s)? 30 feet or more is recommended in between MR and MS🛰️ to begin with depending upon building materials when wirelessly connected.
https://kb.netgear.com/000061709/Where-should-I-place-the-Mesh-WiFi-satellite-of-my-Nighthawk-Mesh-WiFi-6-and-Tri-band-Mesh-WiFi-6-products 📡

Try setting manual channel 1 on 2.4Ghz and 40  channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?

---

uhcax30 wrote:

Hi

 

I have a MR60 with 2 satellites connected to CAX30 I am using CAX30 as modem, hence there is no ISP modem. ISP is Xfinity

 

On a regular basis ( at least once a day) I notice that my MR60 drops wifi. All devices hard wired to MR60 continue to work. MR60 drops both 5G and 2.4G wifi connections. Generally in about 15 minutes or so it would restore the connection by itself. 

I do not see any errors reported in Log. I do see log lines with [DoS attack: Fraggle Attack] or [DoS attack: RST Scan] on a regular basis. Not sure if this is the cause

I have also seen log line with [WLAN access rejected: incorrect security] from MAC. However the very next line I see a DHCP Ip assigned message for the same MAC.

 

MR60 is running V1.1.7.134_2.0.65. 

5GHz Channel is set to 161 and 2.4GHz Channel is set to auto ( i see it on channel 2).

I had done a full hardware reset couple of months back.

I had seen the issue before I upgraded to the latest version

---