NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Tutor

Oct 26, 2022

MS60 (MK62 Kit) / Satellites will not sync after automatic Firmware update to V1.1.7.132_2.0.64

Bought an MK62 mesh kit in June and couldn't be happier, good speeds, great coverage, easy to manage. Six days ago my satellites were both offline (orange indicator lights) and I have been unable to...

Guru - Experienced User

Oct 28, 2022

Any progress on this?

Tutor

Oct 30, 2022

Thanx for asking Furry, but no. Please see my reply further down this thread. I have taken everything back to factory default settings and tried and re-tried but cannot get satellites to synce and form the mesh. Frustrated

FURRYe38
Guru - Experienced User
Oct 30, 2022
Try downgrading the MR to prior version of FW and see if the MS reconnect:

https://community.netgear.com/t5/Nighthawk-Mesh-System/New-MR60-MS60-Firmware-Version-1-1-6-124-Released/td-p/2218069/jump-to/first-unread-message

If they do, manually update the MS first then the MR back to v.132:

https://community.netgear.com/t5/Nighthawk-Mesh-System/New-MR60-MS60-Firmware-Version-1-1-7-132-Released/td-p/2264638/jump-to/first-unread-message
- ChicagOntarian
  Tutor
  Oct 30, 2022
  Furry,
  Thanx again.
  This was your original suggestion which I did try, but nothing has gotten me to the point where either satellite will re-connect.
  
  At a loss what to try next.
  - mnzs-blen
    Aspirant
    Oct 31, 2022
    If devices were working fine back then, it should work now too..
    Did you all try the Sync by connecting the MR LAN port to MS LAN port while the internet is on via WAN port ?