NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

RonMiller58's avatar
RonMiller58
Follower
Jul 31, 2023

Nighthawk Mesh MR80 with switch connectivity issues

Issue 1: I have a new Arris cable modem connected to a MR80 mesh router, and a 16 port (Netgear ProSafe FS116P) dumb switch to the MR80. I have several wired devices such as TV's and computers connected to the switch. if the switch is connected to the MR80 i keep dropping connection to the wired devices. If i have the switch connected directly to the Arris Cable modem i never lose connection.  

 

Issue 2: i have a security camera system that i am attempting to get connected to the internet. I am unable to get the email notifications or NTP to connect.

 

Any ideas would be appreciated.

1 Reply

  • FURRYe38's avatar
    FURRYe38
    Guru
    Jul 31, 2023

    Is the FS116 is a 100Mpbs switch try swapping that switch out for a GS series switch which are 1Gb supporting. 

    CAT6 LAN cabling is recommended.

     

    What Firmware version is currently loaded?
    What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
    Be sure your using a good quality LAN cable between the modem and router. CAT6 is recommended.