NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Nighthawk MS60 in a loop?
Hi, i have installed the MK63 Nighthawk system. The router and 2 satellites are working fine. Due to the structure of our house i recently bought a second hand MS60 satellite for extra coverage....
try hardwiring the satellite into the router. That should allow it to connect.
Then the router should assign it an ip address. use the ip address to connect to it and log into it.
From there you should be able to manually update it.
Or you can try factory resetting it and try connecting directly to it.
Hardwire a pc/laptop into it (disable the laptop/pc's wireless).
Its default IP address should be 192.168.1.250 if it hasn't been setup.
Connect to it at that and try to login and update it.
try hardwiring the satellite into the router. That should allow it to connect.
Then the router should assign it an ip address. use the ip address to connect to it and log into it.
From there you should be able to manually update it.
Or you can try factory resetting it and try connecting directly to it.
Hardwire a pc/laptop into it (disable the laptop/pc's wireless).
Its default IP address should be 192.168.1.250 if it hasn't been setup.
Connect to it at that and try to login and update it.