NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Port Forwarding trouble with Nighthawk MK63/MR60
To preface, my network is setup like this: Fibre Terminal → GS105 Switch → [MR60/MK63] [PC] [TVs] The Firmware is V1.1.7.134_2.0.65 My public IP is static to my knowledge I've been trying for ...
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
Be sure your using a good quality LAN cable between the modem and router. CAT6 is recommended.
Is the WAN IP address a ##.##.###.### address or a 192 or 172 or maybe a 10.something IP address?
Be sure uPnP is disabled on the router before setting up any PF configurations.
Be sure that your actively using the port prior to using port checkers.
I'm unsure of the model of the ONT, but I am using a cat6 connection everywhere. The WAN IP address is 100.XX.XX.XXX and the Public is 200.XX.XX.XXX.