NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

bmcguigan21's avatar
bmcguigan21
Follower
Oct 06, 2020

Transition to Mesh Network

Hi all,   Recently I purchased the NETGEAR AC1750 Dual-Band Wi-Fi 5 Router as well as the NETGEAR - 16 x 4 DOCSIS 3.0 Cable Modem for my 3 story house. After the purchase, I realized I was stuck to...
schumaku's avatar
schumaku
Guru - Experienced User
Oct 11, 2020

Brian,

Both wireless extenders and Mesh systems with a wireless backhaul suffer from the same physical limitations caused by the building substance itself typically.

 

Best advise is always adding CAT6A cabling or better from a central point e.g. near to the Internet access/cable modem/fiber point for the vertical and or longer distance horizontal coverage. At these cables you can add add wireless acess points (e.g Netgear WAC5xx or WAX6xx) to provide wireless access in these areas of the house. No need to be mis-guided by the all wireless Mesh marketing - this might work on some light constructions, but not in decent or older buildings.  

 

Regards

-Kurt