NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Cannot change IP address in the XR500
Hi guys I'm new to the XR500 device. I cannot change the default IP address from 192.168.1.1 to 192.168.10.1 The router is running Firmware Version 2.3.2.134. When I change the IP address to 1...
UPDATE: It's almost 2:00AM here at the epicentre of the known universe (Sydney, Australia... where God LIVES!!)
My brain is now officially mush and I have no idea how I did it, but I managed to get the IP address changed and it stuck!! WOOOHOOO! đ
I know somewhere in there I flashed the firmware twice and also did two factory resets.
After the second factory reset, I managed to get the change in the IP to stick and not bring up the 'Bad Gateway' error but then it hung while rebooting so I manually rebooted the the router and then found the change had finally worked.
I know I should have kept better notes of what I did but after fartarsing around for waaaaay too many hours I was well and truly over it.
Thank you all for your your suggestions , your time and your patience.
CheersCharlton đ
"What browser are you trying to do this from? A 400 error would suggest it's a client side issue so we should start there. Does it work if you use an incognito/private window to do this? Or perhaps a different browser all together?"
I've tried Chrome and Brave
Good suggestion above, also, just to check, what is the IP to access the modem the XR is connected to?