NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

Manuellll's avatar
Manuellll
Apprentice
May 22, 2019

Double nat

put in the exposed host of the fritz box 7590 my modem the ip wan of the router but anyway I have the double nat how do I avoid this thing given that in gaming

70 Replies

  • So do you want to use the XR300 as an access point for your fritz box or do you want the XR300 to be the router, and the fritz box to just be a modem?

    • Manuellll's avatar
      Manuellll
      Apprentice

      exactly I would like this that the fritz acts as a modem and xr500 from a router avoiding micro lag and double nat as I need it to play

      • FURRYe38's avatar
        FURRYe38
        Guru - Experienced User

        You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.

  • FURRYe38's avatar
    FURRYe38
    Guru - Experienced User

    If the isp modem can't be bridged fully, then the DMZ on the modem will be the best only solution for using the XR router with the modem/router combo. DMZ helps wtih the double NAT issue. 

     

    Modem Combo Units:
    Couple of options,
    1. Configure the modem for transparent bridge mode. Then use the NG router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
    2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ for the IP address the NG router gets from the modem.