HI guys,

I need your help on port triggering. I ran in to a manual that stated the trigger ports for PS5 were 3478-3479 and then the inbound ports are the standard tcp 1935, 3478-3480 and udp 3478-3479. I included some other ports but not sure about them (See screenshot below)

An issue is that with dumaos you can only enter 1 trigger port, so I duplicated each entry so I have a trigger on 3478 and 3479 for eacht inbound port range.

My question is , is this done correctly? I can play games etc, Upnp is turned off. How can I check if this is a working configuration and if its correct? Thanks in advance,

Regards
Bart Slaman

Port Triggering Portmap Table

#	Enable	Service Name	Service Type	Inbound Connection	Service User
1		PS5-1935	TCP:3478	TCP/UDP:1935..1935	192.168.4.111
2		PS5-9308	UDP:3478	UDP:9308..9308	192.168.4.111
3		PS5-1935-2	TCP:3479	TCP/UDP:1935..1935	192.168.4.111
4		PS5-80	TCP:3478	TCP:80..80	192.168.4.111
5		PS5-80-2	TCP:3479	TCP:80..80	192.168.4.111
6		PS5-443	TCP:3478	TCP:433..433	192.168.4.111
7		PS5-443-2	TCP:3479	TCP:443..443	192.168.4.111
8		PS5-3478-3480	TCP:3478	TCP:3478..3480	192.168.4.111
9		PS5-3478-3480-2	TCP:3479	TCP:3478..3480	192.168.4.111
10		PS5-3478-3480 UDP	UDP:3478	UDP:3478..3479	192.168.4.111
11		PS5-3478-3480 UDP 2	UDP:3479	UDP:3478..3479	192.168.4.111
12		PS5-9308 2	UDP:3479	UDP:9308..9308	192.168.4.111

Forum Discussion

DumaOS 2.* propper port triggering PS5