NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Rick6922
Jan 13, 2019Luminary
Here we go again
just updated my xr700 to new fireware about an hour ago. will not stay conected to the xbox1x AGAIN.... [UPnP set event: add_nat_rule] from source 192.168.1.8, Sunday, January 13, 2019 13:44:51 [UPnP...
- Jan 14, 2019
i fiqured it out, thanks to all that responed!
Rick6922
Jan 13, 2019Luminary
[UPnP set event: add_nat_rule] from source 192.168.1.8, Sunday, January 13, 2019 13:44:51 [UPnP set event: del_nat_rule] from source 192.168.1.8, Sunday, January 13, 2019 13:44:48 [DHCP IP: 192.168.1.8][Device Name: XBOXONE] to MAC address 2c:54:91:99:2a:10, Sunday, January 13, 2019 13:44:47 [DumaOS] DHCP lease change., Sunday, January 13, 2019 13:44:47 [DumaOS] DHCP new event., Sunday, January 13, 2019 13:44:47 [DumaOS] config write 'com.netdumasoftware.devicemanager.database', Sunday, January 13, 2019 13:44:47 [DHCP IP: 192.168.1.8][Device Name: XBOXONE] to MAC address 2c:54:91:99:2a:10, Sunday, January 13, 2019 13:44:45 [DumaOS] DHCP lease change., Sunday, January 13, 2019 13:44:45 [DumaOS] DHCP new event., Sunday, January 13, 2019 13:44:45 [LAG] Active lag now, Sunday, January 13, 2019 13:44:42 [DumaOS] config write 'com.netdumasoftware.devicemanager.database', Sunday, January 13, 2019 13:44:32 [Internet connected] IP address: 24.95.165.47, Sunday, January 13, 2019 13:44:20 [Internet disconnected] Sunday, January 13, 2019 13:44:18 is this styem log saying its deleting the nat rule? if so whats that mean?
- Netduma-FraserJan 13, 2019NetDuma PartnerIt's frequently renewing LAN IP address for the device. Set a static IP for the device and also set a static WAN IP for the router itself
- Rick6922Jan 14, 2019Luminary
i just type the ip address into the xbox to do that on the xbox right?
- FURRYe38Jan 14, 2019Guru - Experienced User
No, set a IP address reservation ON the router.
- Rick6922Jan 14, 2019Luminary
for the static part on the router I dont no how to do.
- Rick6922Jan 14, 2019Luminary
in the wan setup theres no option for static