NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Here we go again
just updated my xr700 to new fireware about an hour ago. will not stay conected to the xbox1x AGAIN.... [UPnP set event: add_nat_rule] from source 192.168.1.8, Sunday, January 13, 2019 13:44:51 [UPnP...
i fiqured it out, thanks to all that responed!
[UPnP set event: add_nat_rule] from source 192.168.1.8, Sunday, January 13, 2019 13:44:51 [UPnP set event: del_nat_rule] from source 192.168.1.8, Sunday, January 13, 2019 13:44:48 [DHCP IP: 192.168.1.8][Device Name: XBOXONE] to MAC address 2c:54:91:99:2a:10, Sunday, January 13, 2019 13:44:47 [DumaOS] DHCP lease change., Sunday, January 13, 2019 13:44:47 [DumaOS] DHCP new event., Sunday, January 13, 2019 13:44:47 [DumaOS] config write 'com.netdumasoftware.devicemanager.database', Sunday, January 13, 2019 13:44:47 [DHCP IP: 192.168.1.8][Device Name: XBOXONE] to MAC address 2c:54:91:99:2a:10, Sunday, January 13, 2019 13:44:45 [DumaOS] DHCP lease change., Sunday, January 13, 2019 13:44:45 [DumaOS] DHCP new event., Sunday, January 13, 2019 13:44:45 [LAG] Active lag now, Sunday, January 13, 2019 13:44:42 [DumaOS] config write 'com.netdumasoftware.devicemanager.database', Sunday, January 13, 2019 13:44:32 [Internet connected] IP address: 24.95.165.47, Sunday, January 13, 2019 13:44:20 [Internet disconnected] Sunday, January 13, 2019 13:44:18 is this styem log saying its deleting the nat rule? if so whats that mean?
It's frequently renewing LAN IP address for the device. Set a static IP for the device and also set a static WAN IP for the router itself
i just type the ip address into the xbox to do that on the xbox right?
No, set a IP address reservation ON the router.
for the static part on the router I dont no how to do.
in the wan setup theres no option for static
Just leave the WAN at Dynamic. Unless your ISP supports giving there customers Static IP addresses, which most don't, leave the router Dynamic DHCP.
Rick6922 wrote:
in the wan setup theres no option for static
when I look at my log files on router it says internet disconected all the time. if you look in the nighthawk gaming router forms .theres other people posting the same issue.
how do i do that,theres other post with the same issue and there saying the new FW is no good. when i down load the old FW i dont no how to install it. when putting it in FW update it says its the wrong file. its a zip file. how do i chose what i want to install on zipfile?
You will have to unzip that folder inorder to find the .img file.
