NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Lefty_Insider
Mar 25, 2023Tutor
Netgear network speeds
So I have a home network with a mix of Win7 (Pro and Ultimate) and Win10 (Pro and LTSB) machines, desktops, towers, NUC and SFF laptops and tablets. Both wired and wireless. The Netgear Nighthawk XR...
Lefty_Insider
Mar 26, 2023Tutor
Thanks for your response.
Let me now add some new complexity, to perhaps bring some clarity.
I put a Samsung tablet next to the NUC.
The NUC with an Intel Ethernet Connection I218-V got 768Mbps
With the Samsung tablet with the factory dock Realtek PCIe GBE Family Controller I got 319Mbps
Switched the router switch ports, no effect on either
I did not yet switch the Cat7 cables between them.
Switched to a USB to a Ethernet adapter on the tablet and no effect
QOS and VPN are OFF in the router, running newest firmware which is older than I would like.
Router MTU is set to the Max (default) on the router at 1500
Am going to try a SuperSpeed Express Card in the slower laptop to see what that brings. Low expectations here.
Each of these three machines get an ipconfig/release and renew daily via a utility I have. It's an OpSec thing.
Do I need to somehow rebuild TCP/IP on the slow machines? netsh int ip rese?
Lefty_Insider
Mar 26, 2023Tutor
PS. I envy your fiber.
- plemansMar 26, 2023Guru - Experienced User
let me see if I can get a mod to move this to the pro gaming forum where the dumaOS guys are.
they're great at knowing the ins/outs of the XR1000 you use.
- Lefty_InsiderMar 26, 2023Tutor
Hey plemans thanks for all the help.
Have your tried testing your connection to https://www.measurementlab.net/ and/or https://testmy.net/multithread?
I am curious on how your results compare to mind, which are not good.
Thanks,
Lefty
- Lefty_InsiderMar 26, 2023Tutor
"let me see if I can get a mod to move this to the pro gaming forum where the dumaOS guys are.
they're great at knowing the ins/outs of the XR1000 you use."
That would be great, I'd like to see new firmware and a never version of the OS that wasn't so slow. Not to mention SNMP support.
"1.4gig download/50mbps upload from Xfinity"
Riddle me this though. Assuming you have a modem with a 2.5Gbps Ethernet port, what router do you have and computer do you have that gives you 1.4Gbps thoughput?
Thanks again for your help,
Lefty
- plemansMar 26, 2023Guru - Experienced User
Lefty_Insider wrote:
"1.4gig download/50mbps upload from Xfinity"
Riddle me this though. Assuming you have a modem with a 2.5Gbps Ethernet port, what router do you have and computer do you have that gives you 1.4Gbps thoughput?
Thanks again for your help,
Lefty
I have a CM2000 (has a 2.5gig port) running to my RBKE963 which then goes to an 8 port 2.5gig switch, then to 2x custom pc's that one has a 2.5gig port and the other a 2.5/5/10gig port. so plenty of testing. Not at home right now to test those sites you posted.