NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Re: DHCP constantly renewing XR500
Hi all, I also started getting the same dhcp lease renewal issue. Im using version 134. I have been using it for years but the past few weeks the router started having this issue. I tried settin...
- Hi Fraser,
Yes i did that and the router seem to be working fine for now. I flashed version 114 using tftp, did factory rest and then upgraded to 134.
Thanks for the usual support.
MJ
Hi,
I tried the suggested solution, but the issue persists. The router stayed fine for a couple of days though
My modem is huawei hg8245w5.
I dont remember if i have done mf reset on the firmware.
Any tips ?
I tried the suggested solution, but the issue persists. The router stayed fine for a couple of days though
My modem is huawei hg8245w5.
I dont remember if i have done mf reset on the firmware.
Any tips ?
Disable DHCP entirely (make sure you've reserved all the IPs) and then it should be better
- Hi Fraser,
Tried disabling dhcp, for some reason it didnt recognize all devices although they have been setup. Re-enabled dhcp again and them couldn’t connect at all to the router.
I did a factory reset and now the router cant boot up . I enter 192.168.1.1 , first time it took me to the license agreement, i accepted it then it got stuck. I used also adv_index but still the same. Did multiple factory resets with no luck. Also turned it off for 10 mins still the same.
I guess the router just died.- Unplug it from power for 10 minutes, this will let the residual power drain, then plug in, wait 4 minutes and try accessing
- Hi,
I tried, initial page started. Then it asked to accept data collection and i accepted. Then the page where the model of the router appeared. I accepted but then it got stuck and the connection timed out. After that i tried again several times but it always timed out.