NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
XR1000 Error "This Rapp is not loaded yet, please try again in a minute. "
I have encountered this error "This Rapp is not loaded yet, please try again in a minute." on 2 of the feature only, Geo-Filter and Ping Heatmap. Have attempted to do factory reset over multiple ...
- Re-upgrade to the same firmware using the TFTP method, once complete wait 2 minutes then access and see if it works. If not do a reset from the interface, wait 2 minutes and try again.
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
Sorry to hear this!
Could you please try going to System Information -> Installed Rapps -> Click the three line menu and set the number of retries to 5.
Then reboot the XR from the interface and see if the issue continues.
Unfortunately it did not solve the issue, still can not access Geo Filter and Ping Heatmap only
- A reboot usually resolves it, did you do a factory reset after upgrading to the latest firmware? If not I would recommend doing that as otherwise remnants from previous versions can cause issues
I did, multiple times, even tried to factory on the pin on reset for 30 second+ method, and the in system menu reset opinion, both Geo Filter and Ping Heatmap never worked; some reset instances actually made QoS unable to open as well
- Can you see whether it loads using the Microsoft Edge browser please?