NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
XR1000 Error "This Rapp is not loaded yet, please try again in a minute. "
I have encountered this error "This Rapp is not loaded yet, please try again in a minute." on 2 of the feature only, Geo-Filter and Ping Heatmap. Have attempted to do factory reset over multiple ...
- Re-upgrade to the same firmware using the TFTP method, once complete wait 2 minutes then access and see if it works. If not do a reset from the interface, wait 2 minutes and try again.
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
Just tried these steps, new error on Geo-Filter: "Script Error"
Waiting it out returns the same rapp not loaded error on both Geo-Filter and Ping Heatmap still
EDIT: I did notice on the main Dashboard screen, the middle big section is on forever load circle, as well as in System Information page, bottom most large section
Re-upgrade to the same firmware using the TFTP method, once complete wait 2 minutes then access and see if it works. If not do a reset from the interface, wait 2 minutes and try again.
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
Re-upload firmware works, thank you very much for your assistance!