NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
XR500 DHCP issue
I've had this router for 4 months now and it works fine most of the time. Once in a while I'll notice that some LAN devices become unresponsive, when I look into the issue it turns out that they have...
Keep us updated, also set static/reserved IPs in LAN Setup
Im having the same issue, set static ips and still keeps happening, is there anyway to get acess to the beta firmware to see if that solves the issue?
Let us know if this suggestion helps:
Try a manual FW load. You might revert back to intial shipping FW to see if the problem is seen there. Factory reset after manually loading FW and setup from scratch.
Set the Default DHCP IP address pool from 192.168.1.1/.254 to 192.168.1.100 to .200.
Try this. Ensure that your using reserved IP addresses for chosen devices ON the router. Ensure that when using Static IP address ON devices that these IP addresses are outside of the default DHCP IP address pool set on the router.
Katgomeow wrote:
Im having the same issue, set static ips and still keeps happening, is there anyway to get acess to the beta firmware to see if that solves the issue?
