Forum Discussion

Aspirant

Dec 18, 2018

XR500 Speed/Bandwidth Allocation not working .. ..

I have a dedicated connection of 600down/30up to my Xbox One X. My XR500 is hooked up to a cable-modem that is run in bridge mode for complete pass-through. I have no other devices running throug...

Wizardofnos07

Aspirant

Dec 19, 2018

Hi there,

Yes, I do have it set to "Always" mode.

Should I be setting it to "When high priority traffic detected" instead?

I'll go through the guide here real quick, thank you.

Wizardofnos07

Aspirant

Dec 19, 2018

Also, does it still make a difference what percentage I have the Anti-bufferbloat set to knowing that I have no other devices or traffic on this network, as it's a dedicated gaming connection only?

Same question for the setting of "Always" or "Only when high priority traffic detected", because again there is no other traffic on this connection.

Thanks

Netduma-Fraser
NetDuma Partner
Dec 19, 2018
Always mode is fine. The percentage isn't as important given your situation. Do you use IPv6, PPPoE or VLAN by any chance?
- Wizardofnos07
  Aspirant
  Dec 19, 2018
  Hi,
  
  As far as I know, I use IPv6
  - Netduma-Fraser
    NetDuma Partner
    Dec 19, 2018
    Could you try disabling IPv6 please and see if that fixes the issue