xr500

JCHAP39
Tutor
Jan 24, 2020
firmware is current version
modem is provider issued, not the problem however i checked, plus system was working well until i reset router to factory, I reset due to haveing issues with Netgear ready nas, have 2 units installed.(104,204) which are connected to a nighthawk switch S8000, which is connected to xr500 via cable. i set nighthawk, 104, and 204 to static connections. did this due to back up program could not locate back up location, dns reassigning. lost all data when i thought i had to reset them as well, lesson learned.

yes i have tried different browsers

so this is where im at now, I have the xr500 working :) apparently it did not like my old password anymore, it was not formatted to its likeing or recommendations. it had worked since i first set it up with no issues. solved by resetting password the way it wanted. which should not of been a issue.

still having issues getting the 104,204, up and running, cannot access them thur the router(xr500). I can access the switch but not the nas systems. see image, this is what i get. on all browsers I can access them thur my lap top directly however.

thanks for responding
- plemans
  Guru - Experienced User
  Jan 24, 2020
  Can you access the NAS's if you plug them directly into the router?
  - JCHAP39
    Tutor
    Jan 24, 2020
    i think i have it sorted.
    
    to answer your question yes
    
    what i have found is that my set up had to be changed. why i dont know it worked fine for the last year.
    
    had to change card links, had eth0 and eth1 linked in nas, also had nighthawk ports linked, to match
    now they are seperated and i have access to both systems. i also reserved ip's in xr500 instead of making ip's static in the units, ie switch,
    nas 104 and 214
    
    i appreciate your response, not sure why i had to change the settings it cost me a lot of time as well as my files

Forum Discussion