NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RBR850 We can't find your Orbi
Today my internet connection suddenly dropped while I was working. Upon troubleshooting, I found that the Orbi app, and 192.168.1.1 from my PC, are both no longer working. The app says "We can't find...
**Updated 5/25/2022 at 12:00 PM Pacific Time
Hello Orbi Family!
Thank you all so very much for sharing your experience with us! As previously mentioned, based on the feedback we received after deploying the first patch to a select group of customers, we learned that we had an opportunity to improve the next interaction of the patch. I am happy to say we have tested this patch internally and start to roll it out to those of you who have already submitted your serial numbers. This group includes those that were in the first round so that your Device List and Armor services will be restored without any intervention on your side.
Update: If you've private messaged me and have not received a response, I promise I'm not ignoring you! đ As you can imagine, I have received quite a lot of messages. To ensure the patch is pushed out to as many of you as possible, I am focusing on grabbing the information and getting it in the hands that need it to push the update.
Update: We have begun to roll out this patch in a phased approach. Several of you should have received the patch overnight. You can check to see if you're system received the patch by going to http://orbilogin.net/debug.htm and confirming the SeAL value shows -2. If you are unable to access this page it means the router has not received the patch. If you've submitted your serial number to me on or before 6 PM last night 5/24/2022, please restart your system by unplugging it and plugging it back in and wait approximately 5 minutes after the router is fully restarted and check again. We have heard a second restart has proven more successful if the router was affected by this issue.
For more information please visit: NETGEAR is rolling out a fix for an issue affecting the Orbi RBK85x and RBK75x Series Mesh Systems.
Please note: the satellites do not need to be updated at this time and may show on a different firmware version. This is expected.
Please continue to add the results of your experience with this issue so we can look into this further if needed. If this is a new issue after being able to access the router settings please create a new topic for better visibility. Thank you!
Best Regards to All,
Christine
First, ChristineT is a trooper and has been working tirelessly to help people get systems up and running. The following comments are not directed to her.
Your testing team is atrocious. How does the testing team NOT find this problem with the most basic function of accessing your router either by webpage or device app? Also disabling a PAID service (Armor) because of buggy firmware is also a bad thing to miss in testing. People have bought the system, then paid money for the subscription, and you disable the protection and they don't even know about it because you never notified anyone. Yes I am harsh about this, but I have been a software tester for over 14 years, so to see this kind of thing slip through the cracks just pisses me off.
You force an update on your customers, but yet do not let them know in any way that a firmware update was pushed to OUR routers. WE PURCHASED these devices, not rent them. We do not have the option to update them ourselves or to use an auto-updating function. Netgear just assumes that we all want their firmware updates when they decide to push them out. The automatic updating mechanism would be a little easier to stomach if we were NOTIFIED when a firmware update is pushed out. This crap of pushing firmware updates without notification feels like they are trying to hide the updates.
My Orbi 6 is the second mesh system that I have had.l My First Orbi system was solid most of the time, with only 1 satellite losing sync once, and a reboot took care of that. With this system, I had to reboot both satellites TWICE to try to get them to sync. I have also had other issues with devices not showing up and had to reboot the satellite again. All these issues in less time than with the first Orbi system.
One last thing. If Netgear is going to insist on pushing firmware to our systems, have a rollback plan in your firmware. GIVE US, YOUR PAYING CUSTOMERS A WAY TO ROLL BACK FIRMWARE THAT HAS BROKEN OUR SYSTEMS. Yes, WiFi still works, but I have 5 Raspberry Pi's around the house and I cannot access any of them because point to point access within MY NETWORK is broken. Also having a rollback function also helps your customers not to have to endure the hardships of waiting over 2 weeks for your technical team to try to figure out the problem with the firmware when this should have been caught before release is a hardship and leaves a bad taste with YOUR customers. We shouldn't have to hobble along for weeks like this.
Again, ChristineT - you have been a trooper and it feels like your the only one to care about the customers.
"I am going to demand the support money I paid is refunded. I am returning it to COSTCO and demanding them to stop selling this idiot companies product. I just switched back to my old router to visit COSTCO."
Does this mean you are going to stop ranting on this thread? Or are you still hoping for an attorney among this group to take you up on your class action idea?
CrazyEddie:
If I get my support money back and return the router and get refund, I will be gone. It may be ranting for you but many of us have paid hefty cost. I am not resetting all my devices. If an attorney takes up cause, I will be more than happy to join.
- We are all in the same boat. Some can give feedback that is helpful - like CurtTerp. Your complaints are just repetitive. If I were a class action attorney, Iâd pass on you as a client.
- đ