NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
2 ghz cctv cameras cannot connect to Orbi RBR760
I have an Orbi RBR760 3-pack system. 1 router and two satellites. I have a large home hence the reason for this purchase. Upon setting it up, we found out that our Uniden cameras will not connec...
Try this. Turn OFF the RBS. Then the power output of the 5Ghz radio to 25%. Be sure that 20/40 MHz Coexistence enabled. Under Advanced Tab/Advanced Settings/Wireless Settings. Then connect your mobile device at a distance from the RBR to ensure the mobile phone keeps connected to the 2.4Ghz radio. After you get the IoT device connected, re-configure the system back to where it was.
Jwarder969 wrote:
I have an Orbi RBR760 3-pack system. 1 router and two satellites.
I have a large home hence the reason for this purchase. Upon setting it up, we found out that our Uniden cameras will not connect to the Orbi as they will only run on 2 ghz. As I cannot separate the channels, how on earth do I enable the cameras to be seen by my Orbi?
Do I have to take the Orbi back and buy another manufacturer (ie ASUS) in order to have visibility of my cameras or is there a workaround as I understand Orbi doesn't allow separate channels to be shown?
Help!!