NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
BulletRouge
Dec 19, 2020Aspirant
AX4200 IP conflicts galore!
SO, my new AX4200 config (router & 2 nodes) is a mess. Before I set it up, I changed my existing setup to lease IP addresses < 130, and waited for everything to have an IP address in that range befor...
FURRYe38
Dec 19, 2020Guru - Experienced User
Of this is the Orbi 7 series system,
Please post about this over in the Orbi AX forum:
https://community.netgear.com/t5/Orbi-AX/bd-p/en-home-orbi-ax
Thank you.
BulletRouge wrote:SO, my new AX4200 config (router & 2 nodes) is a mess. Before I set it up, I changed my existing setup to lease IP addresses < 130, and waited for everything to have an IP address in that range before I did anything. Then I updated firmware all around, and did a factory reset before setting it up. Then before I let any devices connect to the Orbi network I changed DHCP to be > 130. then I let everything connect and virtually everything got new IP addresses. Then the problems began...
My wife yelled that our streaming device was pausing repeatedly. I checked the devie's IP address, and it was new. I rebooted the device for good measure. Same IP address. I went to the Netgear admin UI to look at the connected devices and it showed a completely different device on that IP address.
I was having the same issue on another streaming device, and same pattern. The IP address was showed as being assigned to a completely different device.
I have no other router or any kind on my network. I've had to swap back to my previous setup and everything is rock solid again...
Before I return it, any ideas??