AX6000 Orbi RBK853 unstable quality and not good performance

SS_Italy
Aspirant
Mar 29, 2022
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
Italian provider EOLO, WIFI connection

What is the Mfr and model# of the ethernet switch in the configuration?
I use Mikrotik Routerboard 2011UiAS

What CAT# cable are you using thru out the home? CAT6 is recommended.
All internal cabling are 5E.. Ethernet connection is stable and no packet drops.

What is the size of your home? Sq Ft?
300 mq on 3 differents levels

What is the distance between the router and 📡 satellite(s)? 30 feet or more is recommended in between RBR and RBS📡 to begin with depending upon building materials when wirelessly connected.
https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satellite 📡
Router is on the top, on my office.
First satellite is on level 0 .. it is about 20 mt.. and the second satellite is on basement other 20 metres or something more.

What channels are you using? Auto? Try Auto and 48 on 5Ghz. Or try setting manual channel 1, 6 or 11 on 2.4Ghz and 40 to 48 channel on 5Ghz.
6 for 2,4 and 48 for 5Gg

Any Wifi Neighbors near by? If so, how many?
I'm alonme in the dark.. just another dedicated wifi for s Nintendo Switch of my daughter.

Set CTS to 2347 under Advanced Tab/Advanced Settings/Wireless Settings
ok

Be sure any wifi adapter drivers are up to date.
Windows 10 or 11 on this pc?
Ubunto Linux.. driver are up to date.
- FURRYe38
  Guru - Experienced User
  Mar 29, 2022
  Might try channel 1 and 40 as well.
  
  Can you compare ping results with a different PC or laptop to compare results?
  I would also turn OFF the RBS's and then run a PING test with the PC around 2-3 meters away from the RBR.
  
  I would also bring the distances between the RBR and RBSs to say 10-15meters. 20meters maybe a bit too far.
  - SS_Italy
    Aspirant
    Mar 29, 2022
    Might try channel 1 and 40 as well.
    
    Can you compare ping results with a different PC or laptop to compare results?
    Same result with other pcs
    
    I would also turn OFF the RBS's and then run a PING test with the PC around 2-3 meters away from the RBR.
    My pc is at 3 meters from the RBR 😞
    
    I would also bring the distances between the RBR and RBSs to say 10-15meters. 20meters maybe a bit too far.
    I would not care so much about distances between RBR and RBS because i have the ethernet backhaul.. i have a bad opinion of it ?

Forum Discussion

AX6000 Orbi RBK853 unstable quality and not good performance