NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Can connect to satellite but not router
First post here, and a newbie so apologize if information is missing. Anyway, here goes: Setup: Modem --> RBR750 --> RBS750 Problem: Have been running smoothly until a couple of days ago, where ...
I just saw that a firmware update was pushed a couple of days ago, a factory reset seems to have done the trick.
What modem is it? No idea, something supplied by the internet supplier. I have fiber internet.
What firmware is on the router and on the satellites? The latest, I can see that an update was pushed approx. 4 days ago.
Do wired devices on the route work fine? No wired devices.What switch do you have? No switch (yet)
And its setup using a wired backhaul? It wasn't, it is now 🙂
Is the satellite wired into the lan port of the router? It is now. Is that not basically the same question as above?Can you recommend a non-managed, non-green switch that is not quite as expensive as yours? 😄
What modem is it?
What firmware is on the router and on the satellites?
Do wired devices on the route work fine?
What switch do you have?
And its setup using a wired backhaul?
Is the satellite wired into the lan port of the router?
I just saw that a firmware update was pushed a couple of days ago, a factory reset seems to have done the trick.
What modem is it? No idea, something supplied by the internet supplier. I have fiber internet.
What firmware is on the router and on the satellites? The latest, I can see that an update was pushed approx. 4 days ago.
Do wired devices on the route work fine? No wired devices.What switch do you have? No switch (yet)
And its setup using a wired backhaul? It wasn't, it is now 🙂
Is the satellite wired into the lan port of the router? It is now. Is that not basically the same question as above?Can you recommend a non-managed, non-green switch that is not quite as expensive as yours? 😄
I've used a multitude of switches and haven't had any issues.
I'd just pick up a cheap non-managed switch and you should be fine.
Like I said, i've tried quite a few different non-managed and never had one have issues.
So you should be pretty safe. Just pick a decent non-managed gigabit that has the port layout/amount that you want.
So you have the router working now?
If so, I'd mark it solved so others aren't still trying to fix this 🙂
I do, thanks!