NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
brandobot
Feb 03, 2022Guide
Device not showing up under "Attached Device" in console
On my RBR850, I connected a device via wifi. On the device itself (while connected through bluetooth), I can see my device has an IP of 10.0.0.83. From another device on my network, I can ping this d...
FURRYe38
Feb 03, 2022Guru - Experienced User
What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
What device are you referring too?
- brandobotFeb 03, 2022GuideFirmware 4.6.3.16
Modem is Arris bgw210.
The device connected is a Bobcat 300 Helium miner.- FURRYe38Feb 03, 2022Guru - Experienced User
Your ISP Modem already has a built in router and wifi. This would be a double NAT (two router) condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktopI recommend option #2.
What browser are you using?
Does the Orbi app experience same thing with this device not appearing?
Is the device connecting to the RBR or RBS that you can tell? Look at the RBS web page as well.
Might review this as well:
- brandobotFeb 03, 2022GuideMy modem has wifi disabled. I have ip passthrough configured and my orbi is in router mode.
I’ve used chrome and safari browsers on my windows, mac and iphone. I’ve also tried the Orbi app from iPhone. The device is closest to my rbr, but i can check the rbs page